Products
LPHXGN-12 standardized gas insulated ring distributor
The LPHXGN-12 standardized green gas-insulated ring circuit switchgear is developed by our company in accordance with the general trend of green technology development in the State Grid of China and taking into account the current state of high-voltage switching equipment of primary distribution networks in China.
Description
marker
Information materials
General information
The LPHXGN-12 standardized green gas-insulated ring circuit switchgear is developed by our company in accordance with the general trend of green technology development in the State Grid of China and taking into account the current state of high-voltage switching equipment of primary distribution networks in China. Based on advanced domestic and foreign technologies, a new generation of environmentally friendly ring distribution devices has been developed, designed to replace traditional gas-insulated and solid-insulated distribution devices. LPHXGN-12 uses dry air as an insulating medium. The design completely excludes the use of SF₆ gas, which ensures the environmental friendliness of the equipment and meets the requirements for the development of environmentally friendly distribution networks. The device meets the technical requirements of the State Grid Company of China for the integration of primary and secondary equipment, has passed State Grid standardization certification and has a full set of standardization certificates.
Characteristics
1. Environmentally friendly: dry air is used as an insulating medium, without the use of SF₆ and other greenhouse gases.
2. High performance characteristics: the product design has undergone modeling, calculation and optimization of the electric field. The product has successfully passed all relevant tests and tests.
3. Safe operation of the three-position disconnector: the three-position disconnector ensures safe switching operations and is equipped with visual monitoring of the open contact position.
4. Fully insulated and sealed: Micro-positive pressure design ensures reliable operation of the equipment even at zero overpressure.
5. Modular design: compact design, small dimensions and light weight ensure ease of transportation, installation and replacement of equipment.
6. Flexible circuit designs: Top disconnect and top grounding disconnect and bottom disconnect and bottom grounding disconnect designs are available to meet the technical requirements of State Grid and China Southern Power Grid.
7. High resistance to environmental conditions: the equipment can be used in a variety of climatic and operating conditions, including areas at altitudes up to 5000 m above sea level, regions with extremely low temperatures, low-lying and humid areas, coastal areas with high concentrations of salt fog, and areas with strong winds and high dust levels.
contact us
Related Popular Products
WITM1E smart circuit breaker in plastic housing
WTM1E series of smart plastic circuit breakers is one of the new products developed by our company based on international advanced technology. Designed for use in alternating current circuits with a frequency of 50 Hz with a rated operating voltage of 400 V and a rated operating current of up to 800 A for infrequent switching and infrequent starts of electric motors.
Prefabricated compartment with integrated energy distribution and storage for transformer substation
Structurally, the installation consists of an upper prefabricated container module and a lower mobile platform, which ensures ease of transportation. From a functional point of view, the installation includes four main compartments: a high-voltage compartment, a transformer compartment, a low-voltage compartment and an energy storage system. The installation can be directly connected to the 10 kV network and is equipped with a dry-type transformer with a capacity of 400 kVA. The low-voltage compartment is equipped with a cabinet for a multi-circuit system of outgoing feeders.
Standardized cabinet JP
The standardized integrated distribution cabinet type JP is designed for low-voltage power supply systems and is equipped with functions of switching, electricity metering, protection against overvoltage, overload and short circuits, phase loss and leakage currents. Typically it is installed on the low voltage side of the power transformer. The product was developed by our company in accordance with the technical requirements of the State Grid of China to standardize the selection of equipment. Based on the standard design, standardization of a complex distribution cabinet for 380/220 V was carried out.
WIT65-63 DC circuit breaker
WIT65-63 series DC circuit breaker is designed for application in DC circuits with rated operating voltage up to DC1000V, rated insulation voltage 1000V and rated current up to 63A.
WVS-12 (side installation) high voltage indoor installation monolithic vacuum circuit breaker
WVS-12 series (side installation) high-voltage indoor high-voltage monolithic vacuum circuit breakers are products developed by our company based on WVS-12 series through secondary upgrading and design modification, and meet the domestic advanced level. The overall layout of the product is made according to a longitudinal mounting scheme, which makes it more suitable for use together with various load switches as an input protection unit, as well as as a feeder switch in complete transformer substations with a limited area.
WITQ1 intelligent automatic dual power switch
WTQ1 series of intelligent automatic dual power switches are designed for dual power AC power systems with a frequency of 50Hz, rated operating voltage of 400V and currents ranging from 6A to 630A. The product has overload, short circuit, undervoltage and phase loss protection functions. If a malfunction occurs in one of the power sources, the system automatically switches between the main and backup sources, which ensures reliable power supply to critical consumers.
WVS-12 monolithic high voltage indoor vacuum circuit breaker
The WVS-12 series of high-voltage indoor high-voltage monolithic vacuum circuit breakers are products developed by our company through design optimization based on advanced foreign technology, and meet the domestic advanced level. Its drive uses an optimized special spring drive, and the main current-carrying circuit is made according to solid insulation, which increases the product’s resistance to dirt and moisture.
KYN28-12 standardized armored withdrawable AC switchgear with metal shell
The KYN28-12 standardized metal-clad withdrawable AC switchgear is designed for three-phase AC networks with a frequency of 50 Hz and a rated voltage of 12 kV, with one busbar or one sectional busbar. The product meets the requirements of international and national standards, including IEC 60298 and GB/T 3906.
GCS low voltage withdrawable switchgear
The GCS withdrawable type low-voltage switchgear is designed for use in low-voltage power distribution systems in power plants, substations, petrochemical plants, industrial and mining plants, high-rise buildings and other facilities. The device is used as a center for electric drive, power distribution and motor control, as well as for reactive power compensation and performing functions of conversion, distribution and control of electrical energy.
WVT-12 intelligent monolithic high voltage vacuum circuit breaker
WVT-12 series of high voltage intelligent monolithic vacuum circuit breakers is a new generation of medium voltage switching devices produced by our company for the construction of smart power grids and the Internet of Things in the future. The product is distinguished by its intelligence, high reliability, the possibility of remote control and monitoring, automation of operations, wide adaptation to environmental conditions and ergonomic control, which provides it with broad prospects for use in electrical power systems.
Smart circuit breaker
This product is developed on the basis of a modular circuit breaker by upgrading the actuator and adding additional electronic components. The maximum current of the product reaches 125 A, switching life is up to 10,000 cycles. The product provides comprehensive monitoring of the relevant parameters of the distribution system, performs the functions of electricity monitoring, energy consumption monitoring, electrical fire safety monitoring, electricity metering/collection and fire monitoring.
WITM1E intelligent metering circuit breaker
The WITM1E series of intelligent metering circuit breakers (hereinafter referred to as circuit breakers) are new low-voltage switching devices that combine high-precision current sensors, a measuring unit and a protection unit. The product has powerful data processing and communication capabilities, as well as high sampling accuracy; A compact high-frequency power line communication (HPLC) module is built in, and local RS485 and power line communication interfaces are available.
ZW□-12 pole switch with deep integration of primary and secondary equipment
The ZW□-12 type pole switch with deep integration of primary and secondary equipment, made with a completely sealed and completely insulated design, is mainly designed to perform the functions of sectioning and connecting the main lines of the 10 kV distribution network. This product adopts advanced technologies including current sensors, voltage sensors, capacitor power take-off module and line loss collection module to realize adaptive comprehensive feeder automation function on site
WITXZ-80 external circuit breaker for electric meters
Smart electricity meters as terminal devices of smart electrical networks are gradually entering our daily lives. However, existing external circuit breakers for electric meters can only automatically turn off the power in case of debt, and after payment requires manual activation. In this regard, power grid companies incur huge maintenance costs, but the problem of timely restoration of power supply remains unresolved, which significantly reduces the quality of service to consumers.
WITQ5 intelligent automatic dual power switch
WITQ5 series of intelligent automatic dual power switches are designed for dual power AC power systems with a frequency of 50Hz, rated operating voltage of 400V and currents ranging from 16A to 1600A. The product has the functions of voltage control, frequency control, communication interface, electrical and mechanical interlocking, providing automatic, remote electrical and emergency manual control capabilities.
WIT47LE-80 high breaking small size differential circuit breaker
WIT47LE-80 series small leakage current protection circuit breaker with high breaking capacity features advanced design, high reliability, high switching capacity, compact size and aesthetic appearance. The product is designed for use in 50Hz AC power supply, with rated operating voltage up to 400V and rated current from 6A to 80A.
