Products
WITXZ-80 external circuit breaker for electric meters
Smart electricity meters as terminal devices of smart electrical networks are gradually entering our daily lives. However, existing external circuit breakers for electric meters can only automatically turn off the power in case of debt, and after payment requires manual activation. In this regard, power grid companies incur huge maintenance costs, but the problem of timely restoration of power supply remains unresolved, which significantly reduces the quality of service to consumers.
Description
marker
Product Description
Smart electricity meters as terminal devices of smart electrical networks are gradually entering our daily lives. However, existing external circuit breakers for electric meters can only automatically turn off the power in case of debt, and after payment requires manual activation. In this regard, power grid companies incur huge maintenance costs, but the problem of timely restoration of power supply remains unresolved, which significantly reduces the quality of service to consumers. The WTXZ-80 series external circuit breaker (with internal rotating shaft) for electric meters produced by our company not only reliably provides automatic shutdown when in arrears and automatic turn on after payment, but also effectively protects lines and terminal equipment while transmitting on and off state signals at the same time. The product meets the requirements of the technical regulations of the State Grid Corporation of China “Q/GDW11421-2015 Technical specifications for external circuit breakers for electric meters”, as well as the technical regulations of the South China Electric Grid Corporation “Technical specifications for external low-voltage circuit breakers for electric meters with payment control”.
contact us
Related Popular Products
WVS-12 monolithic high voltage indoor vacuum circuit breaker
The WVS-12 series of high-voltage indoor high-voltage monolithic vacuum circuit breakers are products developed by our company through design optimization based on advanced foreign technology, and meet the domestic advanced level. Its drive uses an optimized special spring drive, and the main current-carrying circuit is made according to solid insulation, which increases the product’s resistance to dirt and moisture.
WVT-12(M) monolithic high voltage indoor vacuum circuit breaker with magnetic drive
WWT-12(M) series of high-voltage indoor monolithic vacuum circuit breakers with magnetic drive is a new generation of products developed by our company based on the concept of high reliability, long service life and ease of operation, by optimizing the design based on foreign technology, and meets the domestic advanced level. The magnetic drive used in them has such significant advantages as small dimensions, light weight, simplicity of design, reliable operation, no need for maintenance and long service life.
YBM-120.4 block transformer substation
The YBM-12/0.4 series complete transformer substation is a compact complete device that combines high-voltage switching equipment, a power transformer and low-voltage electrical equipment. The substation is designed to supply power to city buildings, small and medium-sized industrial enterprises, mining and oil production facilities, temporary construction sites and other facilities. It is used to receive and distribute electrical energy in power supply systems.
WVS-12 (side installation) high voltage indoor installation monolithic vacuum circuit breaker
WVS-12 series (side installation) high-voltage indoor high-voltage monolithic vacuum circuit breakers are products developed by our company based on WVS-12 series through secondary upgrading and design modification, and meet the domestic advanced level. The overall layout of the product is made according to a longitudinal mounting scheme, which makes it more suitable for use together with various load switches as an input protection unit, as well as as a feeder switch in complete transformer substations with a limited area.
WITQ3 intelligent automatic dual power switch
WTQ3 series of intelligent dual power automatic transfer switches is designed for dual power AC power systems with a frequency of 50Hz, rated operating voltage of 400V and currents ranging from 6A to 63A. The product has overload, short circuit, undervoltage and phase loss protection functions. If a malfunction occurs in one of the power sources, the system automatically switches between the main and backup sources, which ensures reliable power supply to critical consumers.
WITQ5 intelligent automatic dual power switch
WITQ5 series of intelligent automatic dual power switches are designed for dual power AC power systems with a frequency of 50Hz, rated operating voltage of 400V and currents ranging from 16A to 1600A. The product has the functions of voltage control, frequency control, communication interface, electrical and mechanical interlocking, providing automatic, remote electrical and emergency manual control capabilities.
Standardized cabinet JP
The standardized integrated distribution cabinet type JP is designed for low-voltage power supply systems and is equipped with functions of switching, electricity metering, protection against overvoltage, overload and short circuits, phase loss and leakage currents. Typically it is installed on the low voltage side of the power transformer. The product was developed by our company in accordance with the technical requirements of the State Grid of China to standardize the selection of equipment. Based on the standard design, standardization of a complex distribution cabinet for 380/220 V was carried out.
ZW□-12 high voltage AC outdoor vacuum circuit breaker
The ZW□-12 series of outdoor high voltage AC vacuum circuit breakers with a common chamber is an outdoor switching device with a rated voltage of 12 kV, three-phase alternating current with a frequency of 50 Hz. Designed primarily for switching off and on load currents, overload currents and short circuit currents in electrical systems. It is used in distribution systems of substations, industrial and mining enterprises, rural electrical networks.
WIT65-63 DC circuit breaker
WIT65-63 series DC circuit breaker is designed for application in DC circuits with rated operating voltage up to DC1000V, rated insulation voltage 1000V and rated current up to 63A.
WVK-40.5 monolithic high voltage indoor vacuum circuit breaker
The WVK-40.5 series of high-voltage indoor monolithic vacuum circuit breakers are products developed by our company based on the independently developed WVS-12 series through secondary upgrading and design modification, and correspond to the advanced domestic level. The general layout of the product is made according to the top and bottom mounting scheme; There are two installation methods available: mid-mounted and floor-mounted. The high quality of the product is ensured by precision technological processes.
Prefabricated compartment with integrated energy distribution and storage for transformer substation
Structurally, the installation consists of an upper prefabricated container module and a lower mobile platform, which ensures ease of transportation. From a functional point of view, the installation includes four main compartments: a high-voltage compartment, a transformer compartment, a low-voltage compartment and an energy storage system. The installation can be directly connected to the 10 kV network and is equipped with a dry-type transformer with a capacity of 400 kVA. The low-voltage compartment is equipped with a cabinet for a multi-circuit system of outgoing feeders.
KYN28-12 armored withdrawable AC switchgear with metal shell
The KYN28-12 switchgear is a metal-clad enclosed withdrawable AC switchgear designed for three-phase 50 Hz AC networks with a rated voltage of 3.6-12 kV and one busbar or one sectionalized busbar.
ZW□-12 pole switch with deep integration of primary and secondary equipment
The ZW□-12 type pole switch with deep integration of primary and secondary equipment, made with a completely sealed and completely insulated design, is mainly designed to perform the functions of sectioning and connecting the main lines of the 10 kV distribution network. This product adopts advanced technologies including current sensors, voltage sensors, capacitor power take-off module and line loss collection module to realize adaptive comprehensive feeder automation function on site
WITM1E intelligent metering circuit breaker
The WITM1E series of intelligent metering circuit breakers (hereinafter referred to as circuit breakers) are new low-voltage switching devices that combine high-precision current sensors, a measuring unit and a protection unit. The product has powerful data processing and communication capabilities, as well as high sampling accuracy; A compact high-frequency power line communication (HPLC) module is built in, and local RS485 and power line communication interfaces are available.
WITW3 intelligent universal circuit breaker
The WITW3 series of intelligent universal circuit breakers are designed to distribute power and protect lines and electrical equipment from overload, undervoltage, short circuit, single-phase ground fault and other faults in 50 Hz AC distribution networks with rated voltages up to 690 V and rated currents from 200 A to 4000 A.
WVT-12 intelligent monolithic high voltage vacuum circuit breaker
WVT-12 series of high voltage intelligent monolithic vacuum circuit breakers is a new generation of medium voltage switching devices produced by our company for the construction of smart power grids and the Internet of Things in the future. The product is distinguished by its intelligence, high reliability, the possibility of remote control and monitoring, automation of operations, wide adaptation to environmental conditions and ergonomic control, which provides it with broad prospects for use in electrical power systems.
